Categories 1650 injectors
1650cc Injector		 (Precision Turbo)
Price per Unit (1):  $79.99
Number in packaging:  One
Number in box:  One
         Fuel Management
         Fuel Rails
         Rotating Assemblies
         Stud Kits
         Ignition
These injectors flow 1600 cc/min at 43.5 PSI ( 3 BAR ) and are fully compatible with alternate fuels and alcohol! Some websites may refer to their flow rating as 160 lb/hr or 150 lb/hr or 1680 cc/min Bosch Low Impedance Injectors. Frequently used in racing, flex fuel applications, and alternate fuel applications, these low impedance injectors combine extremely high flow rates with excellent response at low pulse widths! This allows you to use a larger injector than normally possible without hurting idle and low-speed driveability.
         Boost Controllers
         Apex Seals
         Injectors
         Fuel Pumps
         Turbos   Features: · Genuine, reliable, new Bosch injectors
· Excellent response characteristics
· Robust design
· Low impedance
         Turbo Accessories    
         Blow-Off Valves    
         Electronics   Specifications:
 · Coil Resistance: 4.5 Ohms / Low Impedance
· Static Flow Rate @ 43.5PSI (300kPa)
   w/Gas:  1600 cc/min = 152 lb/hr
· Connector:  Bosch EV1
         Throttlebodies    
         Wastegates    
         Wideband        
         Specials 2400cc injector
220-lb Injector

(Precision Turbo)
Price per Unit (1):  $195.00
Number in packaging:  One
Number in box:  One

Genuine Siemens DEKA IV Mototron 220lb/hour Low Impedance Gas & Flex Fuel Injectors (Long Style)
         Clearance
 
 
 
 
   

YES, THEY ARE FINALLY AVAILABLE AGAIN!

These injectors flow 220 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI! These units are low-impedance and require peak and hold injector drivers or additional resistors for saturation drivers. Despite the high flow rate, they are linear and controllable at low pulse widths compared to other extreme flow injectors! These injectors are sometimes referred to as 212lb/hr or 225lb/hr injectors. 

They allow you to run methanol, ethanol, and other flex fuels with fewer injectors for high horsepower applications. Don't settle for questionable modified high-flow injectors when you can have genuine Siemens quality and performance with these. These injectors are perfectly suited for extreme horsepower turbo & supercharger applications.
 
 
 
 
 
 
 
 
    Features:

· Genuine, reliable Siemens injectors
· Excellent response characteristics
· Robust design
· Low impedance
· Fits in most Deka I, Deka IV Long Style, Deka V Long   Style, and Deka VII Long Style applications
     
     
     
     
         
  750cc injector
72-lb Injector
 (Precision Turbo)
Price per Unit (1):  $85.00
Number in packaging:  One
Number in box:  One
 
 
 
 
 
 
 
 
   

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high-flow, high-impedance injectors. This makes these injectors very well-suited to turbocharged and supercharged applications that see high fuel system pressures.

Big fuel delivery for big horsepower. These low impedance injectors will not work with a stock computer and require an aftermarket ECU, such as Haltech, MicroTech, or Motec. These Siemens-Deka or Bosch injectors are very high-quality units which dependably supply large volumes of fuel for thirsty engines. Sold individually.
   
   
   
   
   
   
   
         
  850cc injector
83-lb Injector
 (Precision Turbo)
Price per Unit (1):  $85.00
Number in packaging:  One
Number in box:  One
 
 
 
 
 
 
 
 
   

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high-flow, high-impedance injectors. This makes these injectors very well-suited to turbocharged and supercharged applications that see high fuel system pressures.

These injectors flow 86 lbs/hr at 43.5 PSI (3 BAR).
   
   
   
   
    Features: · Genuine, reliable Siemens injectors
· Excellent response characteristics
· Robust design
· Low impedance
     
     
    Specifications: · Coil Resistance: 2.35 Ohms / Low Impedance /
   Low-Z (Peak/Hold driver circuit required)
· Static Flow Rate @ 43.5PSI ( 300kPa )
   w/Gas: 86.2 lb/hr = 888 cc/min = 652.2 g/min
· Connector:  Bosch EV1
· Spray Pattern:  Pencil
· Factory-fitted with Viton upper and lower o-rings