| |
|
|
|
|
| Categories |
| |
|
|
 |
GT42 Compressor V Band |
$70 |
| V-Band Flange and clamp set fits the compressor outlet on the GT42, GT42R, GT42RS, GT47, Schwitzer S400 turbos. 3" Vband machined flange allows typical weld on application (has the proper width for a T-bolt clamp also). Also has a nice inside smooth taper following the compressor discharge. Flange is O-ring grooved and o-ring provided to seal seamlessly against the face of the flange on the compressor housing. |
|
| |
|
|
 |
Oil Drain Flange |
$18
|
| T-Series & Big GT Series turbo oil return/drain flange & gasket set.
These flanges are machined aluminum to be lightweight, durable & to prrovide trouble free sealing. The flange is threaded in the center with 1/2" NPT for use with any 1/2" NPT fitting. |
|
| |
|
|
 |
Oil Feed Line
|
$20
|
| Oil feed line size -4 SS braided stainless steel high temp line with AN ends straight and 90 degree ends.Fits Many T & Big GT turbos including:
T3, T3/T4, T04, T04B, T04E, T04S, T04Z, T61, T64, T66, T70, T72, T76, T78, T88, 60-1, 62-1, GT40R, GT4088R, GT4094R, GT42R, GT42RS,S400,S480 etc. |
|
| |
|
|
 |
T3 Flange
|
$25
|
| New CNC Machined weld flange for T3 turbine inlet WITH Tapped holes. 1/2" thick prevents warping with high heat. Bolt pattern: 3.375" x 1.75" |
|
| |
|
|
 |
T3 GT Outlet Flange |
$30
|
| CNC Machined 4 bolt Welding flange for T3 turbine with External wastegate use. The inner diameter of the circle is 3 and Thick material wont distort during welding. |
|
| |
|
|
 |
T3 Outlet Flange |
$30
|
| CNC Machined 5 bolt Welding flange for T3 turbine with External wastegate use. The inner diameter of the circle is 2.5" and has a step to sink a 2.5" OD tube flush for welding. 1/2" Thick material wont distort during welding. |
|
| |
|
|
 |
T4 Flange
|
$25
|
| Machined weld flange for T04 turbine inlet. 1/2" thick prevents warping with high heat. Bolt pattern: 3.250" x 2.750". The Flange has an innder diameter of 3.00". |
|
| |
|
|
 |
T6 Flange
|
$25
|
| Turbine Inlet Flange, Larger rectangular bolt pattern with 4.5" and 2.75" center to center bolt patterns. Bolt pattern is also found on larger full size GT42 ,GT45,GT47, Schwitzer S400 turbine housing and other similar size turbos. 1/2" Thick mild steel, precision CNC machined. |
|
| |
|
|
 |
T6 Turbo Blanket
|
$149
|
| Turbine Inlet Flange, Larger rectangular bolt pattern with 4.5" and 2.75" center to center bolt patterns. Bolt pattern is also found on larger full size GT42 ,GT45,GT47, Schwitzer S400 turbine housing and other similar size turbos. 1/2" Thick mild steel, precision CNC machined. |
|
| |
|
|
| |
|
|
|
| Fuel Management |
|
| Fuel Rails |
|
| Rotating Assemblies |
|
| Stud Kits |
|
| Ignition |
|
| Boost Controllers |
|
| Apex Seals |
|
Injectors
|
|
| Fuel Pumps |
|
| Turbos |
|
| Turbo Accessories |
|
| Blow-Off Valves |
|
| Electronics |
|
| Throttlebodies |
|
| Wastegates |
|
| Wideband |
|
| Specials |
|
| Clearance |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
| |
|
|
| |
|
|
